Home   |   Privacy Policy   |   Glossary   |  Contact Us  |  Sitemap
  • Applications
  • LED Lamps
  • New Application
  • Solar LED Street Light
  • Charger
  • Micro Heater
  • High Power Solid
  • State Relay
  • EV Li-ion Battery Pack
  • Home Electrical Products
  • Surge Protection Devices
  • Industrial Power Supplies
  • Solar Inverter
  • Transformer
  • E-ballast
  • Small SMPS
  • Dimmer
  • News
  • Resources

  • Glossary of Thermal-Link

  • Thermal-link
  • UL new name, also known as Thermal Cutoff or Thermal Fuse. Thermal-link is a non-resettable device incorporating a Thermal Element, which will open a circuit once only when exposed for a sufficient length of time to a temperature in excess of that which it has been designed.
  • Thermal Element
  • A metallic or non-metallic fusible material, that is part of a Thermal-link and is responsive to temperature by a change of state, such as solid to liquid at the temperature for which it is calibrated.
  • Rated Functioning Temperature(Tf)
  • The temperature of the Thermal-link, which causes it to change its state of conductivity with a detection current up to 10 mA as the only load.
  • Fuse Temperature(Fuse-Temp.)
  • The measured temperature when the Thermal Element is blown. The temperature is measured with silicone oil bath, of which temperature is increased at the rate of 0.5~1°C/min.
  • Holding Temperature(TH)
  • The Max. temperature of the Thermal-link at which it will not change its state of conductivity during 168 hours under the rated current.
  • Max. Temperature Limit(TM)
  • The Max. temperature at which the Thermal-link can maintain its mechanical and electrical properties without being impaired for 10mins.
  • Rated Current(Ir)
  • The current used to classify a Thermal-link, which is the Maximum current that the Thermal-link allows to carry and are able to cutoff the circuit in safety.
  • Rated Voltage(Ur)
  • The voltage used to classify a Thermal-link, which is the Maximum voltage that is allowed to apply to the circuit in which the Thermal-link is used.
  • Interrupting Current(Ib)
  • The Value of the current that the Thermal-link is capable of interrupting at rated voltage and under specified circuit conditions.
  • Transient Overload Current(Ip)
  • A direct current pulse train which the Thermal-link is able to withstand without impairing its characteristics.
  • Markings

  •